Course: WLD203 First Term: 2018 Fall
Final Term: Current
Final Term: 9999
|
Lec + Lab 6.0 Credit(s) 6.0 Period(s) 6.0 Load
Credit(s) Period(s)
Load
Subject Type: OccupationalLoad Formula: T Lab Load |
MCCCD Official Course Competencies | |||
---|---|---|---|
1. Review the WPQR for weld process to test. (I)
2. Review the WPQTR for weld process to test. (II) 3. Review the WPS for weld process to test. (III) 4. Select proper welding base material applying WPS. (III) 5. Select proper filler material applying WPS. (III) 6. Select proper joining method applying WPS. (III) 7. Demonstrate tacking of base material for Certification test per WPS. (III, IV) 8. Demonstrate setting base metal in test stand, adjust height and direction to ensure proper position per WPS. (III, IV) 9. Apply root pass of base material per WPS. (III, IV) 10. Examine root pass to verify compliance with WPS. (III, IV) 11. Apply filler passes as necessary to fill up grove in base material per WPS. (III, IV) 12. Examine fill passes to verify it conform to WPS. (III, IV) 13. Apply cap on base material per WPS. (III, IV) 14. Examine fill passes to verify it conform to WPS. (III, IV) 15. Apply stamp identification number into finished test coupon. (IV) | |||
MCCCD Official Course Competencies must be coordinated with the content outline so that each major point in the outline serves one or more competencies. MCCCD faculty retains authority in determining the pedagogical approach, methodology, content sequencing, and assessment metrics for student work. Please see individual course syllabi for additional information, including specific course requirements. | |||
MCCCD Official Course Outline | |||
I. Welding Procedure Qualification Record (WPQR)
A. Joint Design B. Filler Metal C. Position D. Preheat E. Weld Increment Sequence F. Heat Post Weld Treatment G. Gas H. Electrical Characteristics I. Technique II. Welder Performance Qualification Test Record (WPQTR) A. Name B. Identification Number C. Welder/Operator D. Base metal Specification E. AWS Filler metal F. With or without backing G. Weld groove or fillet H. Position I. Thickness J. Test results K. Qualification based on outcome III. Weld Procedure specification (WPS) A. Supporting WPQR specification B. Welding IV. Weld processes in accordance with the WPQR, WPQTR, and WPS. A. SMAW - Shielded Metal Arc Welding B. GMAW - Gas Metal Arc Welding C. GTAW - Gas Tungsten Arc Welding | |||
MCCCD Governing Board Approval Date: n/a |