powered by
Center for Curriculum and Transfer Articulation
Wood Finishing
Course: GTC132

First Term: 2018 Fall
 Lec + Lab   3 Credit(s)   4 Period(s)   4 Load  
Subject Type: Occupational
Load Formula: T Lab Load


Description: Introduction to the materials, processes, and sequences used in applying a variety of finishes to various wood types. Includes abrasives, stains, fillers, surface coats, tools and equipment, and basic refinishing techniques.



MCCCD Official Course Competencies
1. Demonstrate the proper preparation of wood prior to the application of a finish. (I)
2. Demonstrate the correct selection, use, and care of application tools including brushes and spray equipment. (I)
3. Demonstrate the correct use of abrasives. (II)
4. Demonstrate the correct selection and application of stains. (III)
5. Demonstrate the correct selection and application of a filler. (IV)
6. Demonstrate the correct selection and application of sealers. (V)
7. Demonstrate the correct selection and application of protective coatings. (VI)
8. Demonstrate the correct rub-out techniques for a clear finish. (VII)
9. Demonstrate the application and rub-out of an enamel finish. (VII)
10. Demonstrate the application of novelty or specialized finishes. (VIII)
11. Use the correct selection of options necessary in the refinishing process. (I-VIII)
MCCCD Official Course Competencies must be coordinated with the content outline so that each major point in the outline serves one or more competencies. MCCCD faculty retains authority in determining the pedagogical approach, methodology, content sequencing, and assessment metrics for student work. Please see individual course syllabi for additional information, including specific course requirements.
 
MCCCD Official Course Outline
I. Wood Preparation
   A. Wood Types
      1. Texture
      2. Density
      3. Grain Type
   B. Wood Defects
      1. Mill Marks
      2. Holes/Dents
      3. Glue
   C. Tools
      1. Planes
      2. Scrapers
II. Abrasives
   A. Materials
      1. Abrasive Types
      2. Backing
      3. Grit Sizing
      4. Technique
   B. Power Sanders
      1. Belt
      2. Orbital
      3. In Line
III. Stain
   A. Types of Stain
      1. Oil-Pigmented
      2. Penetrated
      3. Water/Spirit
      4. Combination, Protective/Stain
   B. Technique
IV. Fillers
   A. Paste Filler
   B. Technique
V. Sealers
   A. Shellac
   B. Sanding Sealers
   C. Applications
VI. Protective Coatings
   A. Penetrating Coatings
   B. Varnish
   C. Lacquer
   D. Applications
      1. Brushing
      2. Spray
VII. Hand Rubbing
   A. Materials
   B. Application
VIII. Refinishing
   A. Removers (Strippers)
   B. Restorers
   C. Pitfalls/Repairs
 
MCCCD Governing Board Approval Date:  7/22/2008

All information published is subject to change without notice. Every effort has been made to ensure the accuracy of information presented, but based on the dynamic nature of the curricular process, course and program information is subject to change in order to reflect the most current information available.